Call us: 888-337-2121
View Cart

DOT Bundle (Online)

safety-online-courses-2018
FREE SHIPPING

Free ground shipping on U.S. orders.

mcafee secure
gray starsBe the first one to write a review
The DOT Bundle offers you all of the CMV Driver and CMV Management titles, DOT Hazmat titles, Best Practices for CMV Drivers, and Cargo Securement for CMV Drivers titles for one great low price!
advonline
$159.95
Qty
FREE SHIPPING

Free ground shipping on U.S. orders over $395.00

mcafee secure
Share on Facebook
Bookmark and Share

Additional information about DOT Bundle (Online)

The DOT Bundle offers you all of the CMV Driver and CMV Management titles, DOT Hazmat titles, Best Practices for CMV Drivers, and Cargo Securement for CMV Drivers titles for one great low price!

This bundle contains the following online courses:

  • Accident Prevention and Countermeasures for Management
  • Alabama Metal Coil Certification
  • Best Practices for CMV Drivers: Adverse Conditions and Emergency Situations
  • Best Practices for CMV Drivers: Changing Lanes and Passing
  • Best Practices for CMV Drivers: Curves, Turns, and Downgrades
  • Best Practices for CMV Drivers: Pedestrians and Passengers
  • Best Practices for CMV Drivers: Right-of-Way and Intersections
  • Best Practices for CMV Drivers: Start-Up, Back-Up, and Parking Procedures
  • Cargo Securement for Drivers: Automobiles, Light Trucks, and Vans, and Flattened or Crushed Vehicles
  • Cargo Securement for Drivers: Concrete Pipe
  • Cargo Securement for Drivers: Dressed Lumber and Similar Building Products
  • Cargo Securement for Drivers: General Requirements
  • Cargo Securement for Drivers: Heavy Vehicles, Equipment, and Machinery
  • Cargo Securement for Drivers: Intermodal Containers
  • Cargo Securement for Drivers: Large Boulders
  • Cargo Securement for Drivers: Logs
  • Cargo Securement for Drivers: Metal Coils
  • Cargo Securement for Drivers: Paper Rolls
  • Cargo Securement for Drivers: Roll-On/Roll-Off or Hook Lift Containers
  • Commercial Driver's License (CDL) for Drivers
  • Commercial Driver's License (CDL) for Management
  • DOT Hazardous Materials General Awareness
  • DOT Hazmat Security Awareness for Drivers
  • DOT Hazmat Security Awareness for Shippers and Carriers
  • DOT Training for Drivers of Hazmat Shipments
  • DOT Training for Offerors of Bulk and Non-bulk Hazmat Packages
  • DOT Training for Offerors of Non-bulk Hazmat Packages
  • Driver Qualifications (DQ) for CMV Drivers
  • Driver Qualifications (DQ) for Management
  • Driver Wellness
  • Drug and Alcohol for CMV Drivers
  • Drug and Alcohol for Management
  • Drug and Alcohol Reasonable Suspicion Training for Management
  • Entry-Level CMV Driver Training
  • Financial Responsibility for Passenger-Carrying Motor Carriers
  • Financial Responsibility for Property-Carrying Motor Carriers
  • FMCSR Motor Carrier Compliance: General Applicability and Recordkeeping
  • FMCSR Motor Carrier Compliance: General Cargo Securement
  • Hours of Service for CMV Drivers
  • Hours of Service for Management
  • Hours of Service for Oilfield Operations
  • Hours of Service for Passenger-Carrying CMV Drivers
  • Indiana Metal Coil Certification
  • Operating CMVs: What Drivers Need to Know
  • Operating CMVs: What Management Needs to Know
  • Safe Driving Practices for CMV Drivers
  • Tanker Truck Inspections for Drivers
  • Texas Regulations and FMCSR Exceptions for Intrastate Commerce
  • Vehicle Inspection and Maintenance for CMV Drivers
  • Vehicle Inspection, Repair, and Maintenance Regulations
  • Vehicle Parts and Accessories Safety Regulations
  • Whistleblower Protection (Transportation)

 

Accident Prevention and Countermeasures for Management

Overview

This course, developed in conjunction with the experts at the U.S. Department of Transportation's (DOT) Transportation Safety Institute (TSI), covers the Accident Preventability Evaluations portion of the Federal Motor Carrier Safety Administration (FMCSA) Accident Countermeasures Manual.

Reduced accident rates translate into lower insurance costs, less lost time by drivers, lower repair costs, and safer highways for everyone. Establishing and employing a company standard for safe driving will help reduce accident rates.

Objectives

After taking this course, you will be able to:

  • Recognize steps motor carriers can take to increase fleet safety, including setting up a fleet safety program, designating a safe driving standard, using the DQ Standard to improve driver safety, and planning trips for drivers at the dispatch level
  • Identify methods motor carriers can use to increase driver safety, including incentives for safe driving, punishments for unsafe driving, managing drivers who are drinking, taking drugs, or suffering from illness or fatigue, and improving communication between management and drivers.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits.

Regulations

FMCSR - 49 CFR 383, 385, 391, 392, and 395

Approximate Length

1 hour

Audience

This course is intended for all motor carrier safety compliance personnel.

Delivery Method

Online

Continuing Education Units

0.1

Alabama Metal Coil Certification

Overview

When cargo is transported on the highway, the cargo must be securely placed on or in the vehicle. Loose or falling cargo causes accidents - sometimes severe accidents. As a driver, you need to make sure your cargo is secure. This course provides details on the Federal Motor Carrier Safety Regulations (FMCSRs) covering the securement of metal coils, including the driver's responsibilities for cargo securement and the ways to safely secure this type of cargo.

Students who successfully complete this course will be certified in metal coil securement in accordance with Alabama law Code of Ala.1975, §32-9A- 2(a) (4)a.

Objectives

After taking this course, you will be able to:
  • Secure cargo on or in a CMV in a manner that complies with the Federal Motor Carrier Safety Regulations, specifically 49 CFR 393 Subpart I – Protection Against Shifting and Falling Cargo and 49 CFR 392.9 – Inspection of Cargo, Cargo Securement Devices, and Systems.
  • Secure metal coils to a CMV in a manner that complies with the special rules for that commodity included in the Federal Motor Carrier Safety Regulations (FMCSRs), specifically 49 CFR 393.120.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Units.

 

Regulations


FMCSR - 49 CFR 393 Subpart I with a particular focus on 393.120
FMCSR - 49 CFR 392.9

Approximate Length

45 minutes

Audience

This course is intended for CMV drivers who transport metal coils.

Delivery Method

Online

Continuing Education Units

0.1

Best Practices for CMV Drivers: Adverse Conditions and Emergency Situations

Overview

This "best practices" course covers one topic included in the Safe Driving Practices for CMV Drivers course: Adverse Conditions and Emergency Situations.

Objectives

This course teaches the concepts and skills necessary to:
  • Identify ways to respond to adverse conditions and emergency situations.

Features

This course has these features and more:
  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams.

Regulations

FMCSR - 49 CFR 383, 392, 393, and 396

Approximate Length

10 minutes

Audience

This course is intended for all CMV drivers.

Delivery Method

Online

Best Practices for CMV Drivers: Changing Lanes and Passing

Overview

This "best practices" course covers one topic included in the Safe Driving Practices for CMV Drivers course: Changing Lanes and Passing.

Objectives

This course teaches the concepts and skills necessary to:
  • Recognize how to use defensive driving techniques to change lanes and pass other vehicles on the road safely.

Features

This course has these features and more:
  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams.

Regulations

FMCSR - 49 CFR 383, 392, 393, and 396

Approximate Length

10 minutes

Audience

This course is intended for all CMV drivers.

Delivery Method

Online

Best Practices for CMV Drivers: Curves, Turns, and Downgrades

Overview

This "best practices" course covers one topic included in the Safe Driving Practices for CMV Drivers course: Curves, Turns, and Downgrades.

Objectives

This course teaches the concepts and skills necessary to:
  • Recognize how curves, turns, and downgrades and might lead to accidents and what a defensive driver should do to avoid the hazards of these situations.

Features

This course has these features and more:
  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams.

Regulations

FMCSR - 49 CFR 383, 392, 393, and 396

Approximate Length

10 minutes

Audience

This course is intended for all CMV drivers.

Delivery Method

Online

Best Practices for CMV Drivers: Pedestrians and Passengers

Overview

This "best practices" course covers one topic included in the Safe Driving Practices for CMV Drivers course: Pedestrians and Passengers.

Objectives

This course teaches the concepts and skills necessary to:
  • List the procedures and rules for interacting with pedestrians and passengers in a way that reduces the risks of an accident.

Features

This course has these features and more:
  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams.

Regulations

FMCSR - 49 CFR 383, 392, 393, and 396

Approximate Length

10 minutes

Audience

This course is intended for all CMV drivers.

Delivery Method

Online

Best Practices for CMV Drivers: Right-of-Way and Intersections

Overview

This "best practices" course covers one topic included in the Safe Driving Practices for CMV Drivers course: Right-of-Way and Intersections.

Objectives

This course teaches the concepts and skills necessary to:
  • Identify the steps for safely establishing right-of-way and for safe travel through intersections.

Features

This course has these features and more:
  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams.

Regulations

FMCSR - 49 CFR 383, 392, 393, and 396

Approximate Length

10 minutes

Audience

This course is intended for all CMV drivers.

Delivery Method

Online

Best Practices for CMV Drivers: Start-Up, Back-Up, and Parking Procedures

Overview

This "best practices" course covers one topic included in the Safe Driving Practices for CMV Drivers course: Start-Up, Back-Up, and Parking Procedures.

Objectives

This course teaches the concepts and skills necessary to:
  • Recognize how to avoid the hazards associated with starting up and/or backing up a parked CMV and list ways to help drivers avoid accidents with a parked CMV.

Features

This course has these features and more:
  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams.

Regulations

FMCSR - 49 CFR 383, 392, 393, and 396

Approximate Length

10 minutes

Audience

This course is intended for all CMV drivers.

Delivery Method

Online

Cargo Securement for Drivers: Automobiles, Light Trucks, and Vans, and Flattened or Crushed Vehicles

Overview

When cargo is transported on the highway, the cargo must be securely placed on or in the vehicle. Loose or falling cargo causes accidents sometimes severe accidents. As a driver, you need to make sure your cargo is secure.

This course provides details on the Federal Motor Carrier Safety Regulations (FMCSRs) covering the securement of automobiles, light trucks, and vans, and crushed or flattened vehicles. The course also emphasizes the driver's responsibilities for cargo securement and the ways to safely secure this type of cargo.

Recommended Prerequisite: Cargo Securement for Drivers: General Requirements

Objectives

After taking this course, you will be able to:
  • Secure automobiles, light trucks, vans, or crushed or flattened vehicles to a CMV in a manner that complies with the special rules for that commodity included in the Federal Motor Carrier Safety Regulations (FMCSRs), specifically 49 CFR 393.128 and 393.132.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Units.

 

Regulations

FMCSR - 49 CFR 393.128 and 393.132

Approximate Length

30 minutes

Audience

This course is intended for CMV drivers who transport automobiles, light trucks, vans, or crushed or flattened vehicles.

Delivery Method

Online

Continuing Education Units

0.1

Cargo Securement for Drivers: Concrete Pipe

Overview

When cargo is transported on the highway, the cargo must be securely placed on or in the vehicle. Loose or falling cargo causes accidents - sometimes severe accidents. As a driver, you need to make sure your cargo is secure.

This course provides details on the Federal Motor Carrier Safety Regulations (FMCSRs) covering the securement of concrete pipe, including the driver's responsibilities for cargo securement and the ways to safely secure this type of cargo.

Recommended Prerequisite: Cargo Securement for Drivers: General Requirements 

Objectives

After taking this course, you will be able to:
  • Secure concrete pipe to a CMV in a manner that complies with the special rules for that commodity included in the Federal Motor Carrier Safety Regulations (FMCSRs), specifically 49 CFR 393.124.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Units.

 

Regulations

FMCSR - 49 CFR 393.124

Approximate Length

30 minutes

Audience

This course is intended for CMV drivers who transport concrete pipe.

Delivery Method

Online

Continuing Education Units

0.1

Cargo Securement for Drivers: Dressed Lumber and Similar Building Products

Overview

When cargo is transported on the highway, the cargo must be securely placed on or in the vehicle. Loose or falling cargo causes accidents - sometimes severe accidents. As a driver, you need to make sure your cargo is secure.

This course provides details on the Federal Motor Carrier Safety Regulations (FMCSRs) covering the securement of dressed lumber and similar building products, including the driver's responsibilities for cargo securement and the ways to safely secure this type of cargo.

Recommended Prerequisite: Cargo Securement for Drivers: General Requirements

Objectives

After taking this course, you will be able to:
  • Secure dressed lumber and similar building products to a CMV in a manner that complies with the special rules for that commodity included in the Federal Motor Carrier Safety Regulations (FMCSRs), specifically 49 CFR 393.118.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Units.

 

Regulations

FMCSR - 49 CFR 393.118

Approximate Length

30 minutes

Audience

This course is intended for CMV drivers who transport dressed lumber and similar building products.

Delivery Method

Online

Continuing Education Units

0.1

Cargo Securement for Drivers: General Requirements

Overview

When cargo is transported on the highway, the cargo must be securely placed on or in the vehicle. Loose or falling cargo causes accidents - sometimes severe accidents. As a driver, you need to make sure your cargo is secure.

This course provides details on the general cargo securement rules in the Federal Motor Carrier Safety Regulations (FMCSRs), including the driver's responsibilities for cargo securement, the components of a cargo securement system, and ways to safely secure cargo.

The content in this course covers general commodities. Rules for specific commodities are covered in other course titles.

Objectives

After taking this course, you will be able to:
  • Secure cargo on or in a CMV in a manner that complies with the Federal Motor Carrier Safety Regulations, specifically 49 CFR 393 Subpart I – Protection Against Shifting and Falling Cargo and 49 CFR 392.9 – Inspection of Cargo, Cargo Securement Devices, and Systems.

Features

This course has these features and more:
  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits.

Regulations

FMCSR - 49 CFR 393 Subpart I and FMCSR - 49 CFR 392.9

Approximate Length

45 minutes

Audience

This course is intended for all CMV drivers.

Delivery Method

Online

Continuing Education Units

0.1

Cargo Securement for Drivers: Heavy Vehicles, Equipment, and Machinery

Overview

When cargo is transported on the highway, the cargo must be securely placed on or in the vehicle. Loose or falling cargo causes accidents - sometimes severe accidents. As a driver, you need to make sure your cargo is secure.

This course provides details on the Federal Motor Carrier Safety Regulations (FMCSRs) covering the securement of heavy vehicles, equipment, and machinery.

Recommended Prerequisite: Cargo Securement for Drivers: General Requirements

Objectives

After taking this course, you will be able to:
  • Secure heavy vehicles, equipment, and machinery to a CMV in a manner that complies with the special rules for that commodity included in the Federal Motor Carrier Safety Regulations (FMCSRs), specifically 49 CFR 393.130.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams.

 

Regulations

FMCSR - 49 CFR 393.130

Approximate Length

20 minutes

Audience

This course is intended for CMV drivers who transport heavy vehicles, equipment, and machinery.

Delivery Method

Online

Cargo Securement for Drivers: Intermodal Containers

Overview

When cargo is transported on the highway, the cargo must be securely placed on or in the vehicle. Loose or falling cargo causes accidents - sometimes severe accidents. As a driver, you need to make sure your cargo is secure.

This course provides details on the Federal Motor Carrier Safety Regulations (FMCSRs) covering the securement of intermodal containers.

Recommended Prerequisite: Cargo Securement for Drivers: General Requirements

 

Objectives

After taking this course, you will be able to:
  • Secure intermodal containers to a CMV in a manner that complies with the special rules included in the Federal Motor Carrier Safety Regulations (FMCSRs), specifically 49 CFR 393.126.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Units.

 

Regulations

FMCSR - 49 CFR 393.126

Approximate Length

30 minutes

Audience

This course is intended for CMV drivers who transport intermodal containers.

Delivery Method

Online

Continuing Education Units

0.1

Cargo Securement for Drivers: Large Boulders

Overview

When cargo is transported on the highway, the cargo must be securely placed on or in the vehicle. Loose or falling cargo causes accidents — sometimes severe accidents. As a driver, you need to make sure your cargo is secure.

This course provides details on the Federal Motor Carrier Safety Regulations (FMCSRs) covering the securement of Large Boulders.

Recommended Prerequisite: Cargo Securement for Drivers: General Requirements

Objectives

After taking this course, you will be able to:
  • Secure large boulders to a CMV in a manner that complies with the special rules for that commodity included in the Federal Motor Carrier Safety Regulations (FMCSRs), specifically 49 CFR 393.136.

Features

This course has these features and more:

  • Continuing Education Units (CEUs)
  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams.

 

Regulations

FMCSR - 49 CFR 393.136

Approximate Length

30 minutes

Audience

This course is intended for CMV drivers who transport large boulders.

Delivery Method

Online

Continuing Education Units

0.1

Cargo Securement for Drivers: Logs

Overview

When cargo is transported on the highway, the cargo must be securely placed on or in the vehicle. Loose or falling cargo causes accidents - sometimes severe accidents. As a driver, you need to make sure your cargo is secure.

This course provides details on the Federal Motor Carrier Safety Regulations (FMCSRs) covering the securement of Logs.

Recommended Prerequisite: Cargo Securement for Drivers: General Requirements

Objectives

After taking this course, you will be able to:
  • Secure logs to a CMV in a manner that complies with the special rules for that commodity included in the Federal Motor Carrier Safety Regulations (FMCSRs), specifically 49 CFR 393.116.

Features

This course has these features and more:

  • Continuing Education Units (CEUs)
  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams.

 

Regulations

FMCSR - 49 CFR 393.116

Approximate Length

30 minutes

Audience

This course is intended for CMV drivers who transport logs.

Delivery Method

Online

Continuing Education Units

0.1

Cargo Securement for Drivers: Metal Coils

Overview

When cargo is transported on the highway, the cargo must be securely placed on or in the vehicle. Loose or falling cargo causes accidents - sometimes severe accidents. As a driver, you need to make sure your cargo is secure.

This course provides details on the Federal Motor Carrier Safety Regulations (FMCSRs) covering the securement of metal coils, including the driver's responsibilities for cargo securement and the ways to safely secure this type of cargo.

Recommended Prerequisite: Cargo Securement for Drivers: General Requirements

Objectives

After taking this course, you will be able to:
  • Secure metal coils to a CMV in a manner that complies with the special rules for that commodity included in the Federal Motor Carrier Safety Regulations (FMCSRs), specifically 49 CFR 393.120.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Units.

 

Regulations

FMCSR - 49 CFR 393.120

Approximate Length

30 minutes

Audience

This course is intended for CMV drivers who transport metal coils.

Delivery Method

Online

Continuing Education Units

0.1

Cargo Securement for Drivers: Paper Rolls

Overview

When cargo is transported on the highway, the cargo must be securely placed on or in the vehicle. Loose or falling cargo causes accidents - sometimes severe accidents. As a driver, you need to make sure your cargo is secure.

This course provides details on the Federal Motor Carrier Safety Regulations (FMCSRs) covering the securement of paper rolls, including the driver's responsibilities for cargo securement and the ways to safely secure this type of cargo.

Recommended Prerequisite: Cargo Securement for Drivers: General Requirements

Objectives

After taking this course, you will be able to:
  • Secure paper rolls to a CMV in a manner that complies with the special rules for that commodity included in the Federal Motor Carrier Safety Regulations (FMCSRs), specifically 49 CFR 393.122.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Units.

 

Regulations

FMCSR - 49 CFR 393.122

Approximate Length

30 minutes

Audience

This course is intended for CMV drivers who transport paper rolls.

Delivery Method

Online

Continuing Education Units

0.1

Cargo Securement for Drivers: Roll-On/Roll-Off or Hook Lift Containers

Overview

When cargo is transported on the highway, the cargo must be securely placed on or in the vehicle. Loose or falling cargo causes accidents - sometimes severe accidents. As a driver, you need to make sure your cargo is secure.

This course provides details on the Federal Motor Carrier Safety Regulations (FMCSRs) covering the securement of roll-on/roll-off and hook lift containers. The course also emphasizes the driver's responsibilities for cargo securement and the ways to safely secure this type of cargo.

Recommended Prerequisite: Cargo Securement for Drivers: General Requirements

Objectives

After taking this course, you will be able to:
  • Secure roll-on/roll-off or hook lift containers to a CMV in a manner that complies with the special rules for that commodity included in the Federal Motor Carrier Safety Regulations (FMCSRs), specifically 49 CFR 393.134.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Units.

 

Regulations

FMCSR - 49 CFR 393.134

Approximate Length

30 minutes

Audience

This course is intended for CMV drivers who transport roll-on/roll-of or hook lift containers.

Delivery Method

Online

Continuing Education Units

0.1

Commercial Driver's License (CDL) for Drivers

Overview

This course, developed in conjunction with the experts from the Transportation Safety Institute (TSI) of the U.S. Department of Transportation (DOT), covers the regulations in part 383 of the Federal Motor Carrier Safety Regulations (FMCSR): Commercial Driver's License (CDL). This course outlines the minimum regulatory requirements for obtaining and maintaining a CDL. It focuses on information the driver needs to know to comply with the regulations.

Objectives

This course teaches concepts and skills necessary to:
  • Explain the process for obtaining a CDL
  • Recognize CDL requirements, disqualifications, and penalties, and the notification requirements for drivers with a CDL.

Features

This course has these features and more:
  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits.

Regulations

This course teaches concepts and skills necessary to:
  • Explain the process for obtaining a CDL
  • Recognize CDL requirements, disqualifications, and penalties, and the notification requirements for drivers with a CDL.

Approximate Length

1 hour

Audience

This course is intended for all CMV drivers.

Delivery Method

Online

Continuing Education Units

0.1

Commercial Driver's License (CDL) for Management

Overview

This course, developed in conjunction with the Transportation Safety Institute (TSI) of the U.S. Department of Transportation (DOT), covers the regulations in part 383 of the Federal Motor Carrier Safety Regulations (FMCSR): Commercial Driver's License (CDL). This course outlines the minimum regulatory requirements for obtaining and maintaining a CDL.

Objectives

After taking this course, you will be able to:

  • Understand the applicability and general requirements for a CDL
  • Explain the process for obtaining and maintaining a CDL, and describe the causes of disqualification.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits.

Regulations

FMCSR - 49 CFR 383

Approximate Length

1 hour

Audience

This course is intended for all motor carrier personnel who must be knowledgeable about the regulatory standards for Commercial Driver's Licenses, including:

  • Operators of commercial motor vehicles
  • Safety Supervisors
  • Human Resource (HR) personnel
  • Safety Compliance personnel
  • Owners.

Delivery Method

Online

Continuing Education Units

0.1

DOT Hazardous Materials General Awareness

Overview

This course provides general awareness training covering the basic requirements of the DOT, including the definition of hazardous materials.

Students will become familiar with the DOT hazardous materials regulations related to packaging, marking, labeling, and shipping papers. This course also covers the new requirements designed to enhance the safety of hazardous materials, per the March 25, 2003 DOT final rule, "Hazardous Materials: Security Requirements for Offerors and Transporters of Hazardous Materials." This course can be used for either new employees or as refresher training.

Objectives

After taking this course, you will be able to:
  • Explain the function and importance of packaging, package labels, package marking, shipping papers, and vehicle placards
  • Identify the nine hazmat classes and their divisions
  • Explain the DOT rules for using the proper shipping names and the Hazmat Table
  • Recognize the security risks associated with hazardous materials transportation and list ways to minimize those risks.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits.

 

Regulations

FMCSR - 49 CFR 171, 172, 173, 178

Approximate Length

1 hour

Audience

This course is intended for all employees involved in the transport of hazardous materials.

Delivery Method

Online

Continuing Education Units

0.1

DOT Hazmat Security Awareness for Drivers

Overview

This course, written for drivers of hazardous materials shipments, covers the new requirements designed to enhance the safety of hazardous materials, per the March 25, 2003 DOT final rule, "Hazardous Materials: Security Requirements for Offerors and Transporters of Hazardous Materials." This course can be used for either new employees or as refresher training.

Objectives

After completing this course, you will be able to recognize the security risks associated with hazardous materials transportation and list ways to minimize those risks.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Units.

 

Regulations

DOT Final Rule: HM-232

Approximate Length

30 minutes

Audience

This course is intended for all drivers carrying bulk and non-bulk hazardous materials.

Delivery Method

Online

Continuing Education Units

0.1

DOT Hazmat Security Awareness for Shippers and Carriers

Overview

This course, written for shippers and carriers of hazardous materials shipments, covers the new requirements designed to enhance the safety of hazardous materials, per the March 25, 2003 DOT final rule, "Hazardous Materials: Security Requirements for Offerors and Transporters of Hazardous Materials." This course can be used for either new employees or as refresher training.

Objectives

After completing this course, you will be able to recognize the security risks associated with hazardous materials transportation and list ways to minimize those risks.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits.

 

Regulations

DOT Final Rule: HM-232

Approximate Length

30 minutes

Audience

This course is intended for all shippers, carriers, and handlers of bulk and non-bulk hazardous materials.

Delivery Method

Online

Continuing Education Units

0.1

DOT Training for Drivers of Hazmat Shipments

Overview

This course is designed to meet DOT training requirements for each employee who drives a motor vehicle containing hazardous material. Because more hazardous materials are transported on highways than all other modes of transportation combined, DOT requires that Hazmat drivers have highway-specific training in addition to the basic Hazmat training.

 

This course provides basic Hazmat training for drivers plus highway-specific training, including pre-trip safety inspections, general vehicle operation information, vehicle attendance requirements, and safe loading and unloading. This course also covers the new requirements designed to enhance the safety of hazardous materials, per the March 25, 2003 DOT final rule, "Hazardous Materials: Security Requirements for Offerors and Transporters of Hazardous Materials." This course can be used for either new employees or as refresher training.

 

Objectives

After taking this course, you will be able to:
  • Describe the basic aspects of DOT training for drivers of hazardous materials
  • Identify the different hazardous materials classes and divisions
  • Use the Hazardous Materials Table and its appendices to properly name, label, and placard hazardous materials shipments
  • Follow proper procedures for driving a vehicle containing hazardous materials, including actions like inspecting, loading, and parking
  • Employ the best responses to different hazardous materials emergencies
  • Recognize the security risks associated with hazardous materials transportation and list ways to minimize those risks.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits.

 

Regulations

FMCSR - 49 CFR 171, 172, 177

Approximate Length

4 hours

Audience

This course is intended for all drivers who transport hazardous materials.

Delivery Method

Online

Continuing Education Units

0.4

DOT Training for Offerors of Bulk and Non-bulk Hazmat Packages

Overview

This course is designed to meet DOT requirements to train all employees who directly affect the safe transportation of hazardous materials. Such employees include those who load, unload, or handle hazardous materials; prepare hazardous materials for transportation; or are responsible for the safety of transporting hazardous materials.

This course provides basic hazardous materials training for these employees plus training in DOT requirements for bulk and non-bulk packaging, labeling, loading, and unloading. This course also covers the new requirements designed to enhance the safety of hazardous materials, per the March 25, 2003 DOT final rule, "Hazardous Materials: Security Requirements for Offerors and Transporters of Hazardous Materials." This course can be used for either new employees or as recurrent training.

Objectives

After taking this course, you will be able to:
  • Explain the function and importance of packaging, package labels, package marking, shipping papers, and vehicle placards
  • Identify the nine hazmat classes and their divisions
  • Explain the DOT rules for using the proper shipping names and the Hazmat Table
  • Describe safety considerations for handling hazardous materials
  • Explain the difference between bulk and non-bulk packaging
  • Describe the requirements for labeling non-bulk packages
  • Describe the general marking and placarding requirements for bulk containers
  • Recognize the security risks associated with hazardous materials transportation and list ways to minimize those risks.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits.

 

Regulations

FMCSR - 49 CFR 171, 172, 173, 178

Approximate Length

5 hours

Audience

This course is intended for all shippers, carriers, and handlers of bulk and non-bulk hazardous materials.

Delivery Method

Online

Continuing Education Units

0.5

DOT Training for Offerors of Non-bulk Hazmat Packages

Overview

This course is designed to meet DOT requirements to train all employees who directly affect the safe transportation of hazardous materials. Such employees include those who load, unload, or handle hazardous materials; prepare hazardous materials for transportation; or are responsible for the safety of transporting hazardous materials.

This course provides basic hazardous materials training for these employees plus training in DOT requirements for non-bulk packaging, labeling, loading, and unloading. This course also covers the new requirements designed to enhance the safety of hazardous materials, per the March 25, 2003 DOT final rule, "Hazardous Materials: Security Requirements for Offerors and Transporters of Hazardous Materials." This course can be used for either new employees or as recurrent training.

Objectives

After taking this course, you will be able to:
  • Explain the function and importance of packaging, package labels, package marking, shipping papers, and vehicle placards
  • Identify the nine hazmat classes and their divisions
  • Explain the DOT rules for using the proper shipping names and the Hazmat Table
  • Describe safety considerations for handling hazardous materials
  • Explain the difference between bulk and non-bulk packaging
  • Describe the requirements for labeling non-bulk packages
  • Recognize the security risks associated with hazardous materials transportation and list ways to minimize those risks.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits.

 

Regulations

FMCSR - 49 CFR 171, 172, 173, 178

Approximate Length

4 hours

Audience

This course is intended for all shippers, carriers, and handlers of non-bulk hazardous materials.

Delivery Method

Online

Continuing Education Units

0.4

Driver Qualifications (DQ) for CMV Drivers

Overview

This course, developed in conjunction with the experts from the Transportation Safety Institute (TSI) of the U.S. Department of Transportation (DOT), provides an overview of the Qualification of Drivers regulations with an emphasis on what the driver needs to know.

Objectives

After taking this course, you will be able to:

  • Recognize the driver qualification (DQ) regulations purpose and requirements.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits (CEUs).

Regulations

FMCSR - 49 CFR 391

Approximate Length

30 minutes

Audience

This course is intended for all CMV drivers.

Delivery Method

Online

Continuing Education Units

0.1

Driver Qualifications (DQ) for Management

Overview

This course, developed in conjunction with the experts from the Transportation Safety Institute (TSI) of the U.S. Department of Transportation (DOT), covers the regulations in Part 391 of the Federal Motor Carrier Safety Regulations (FMCSRs): Qualifications of Drivers. This course outlines the minimum regulatory requirements for Driver Qualifications that must be observed by all interstate motor carriers and drivers.

Objectives

After taking this course, you will be able to:

  • Describe the purpose and identify who must comply with the Driver Qualification (DQ) regulations
  • List the first four qualifications for drivers, including the medical requirements
  • List the second four qualifications for drivers, including disqualifications
  • Recognize DQ recordkeeping requirements.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits.

Regulations

FMCSR - 49 CFR 391

Approximate Length

2 hours

Audience

This course is intended for all motor carrier personnel associated with the company's Driver Qualification program, including:

  • Operators of commercial motor vehicles (CMVs)
  • Safety Directors
  • Safety Supervisors
  • Human Resources (HR) personnel
  • Safety Compliance personnel.

 

Delivery Method

Online

Continuing Education Units

0.2

Driver Wellness

Overview

Accidents involving commercial motor vehicles (CMVs) can be catastrophic - goods are spilled and destroyed, vehicles and property are damaged, people are injured, and in the worst cases, they die. One key to preventing CMV accidents is making sure that drivers are in the best physical condition possible. Having healthy drivers on the road is so important that the government requires all new CMV drivers to learn about driver wellness.

In this course, you will learn about six key driver wellness topics. These include diet, exercise, stress reduction, sleep, the use of alcohol and other controlled substances, and smoking. You will discover relevant health hazards associated with each, and we will provide some tips for healthier living (and safer driving).

Note: This course meets the entry-level driver training requirements for Driver Wellness that are outlined in 49 CFR 380.503(c) - Entry-level Driving Requirements, Driver Wellness.

Objectives

After taking this course, you will be able to:
  • Recognize potential health and lifestyle hazards associated with driving CMVs and identify techniques for avoiding them.

Features

This course has these features and more.

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Units

 

Regulations

FMCSA - 49 CFR 380.503(c) - Entry-level Driving Requirements, Driver Wellness

Approximate Length

30 minutes

Audience

Commercial motor vehicle (CMV) drivers

Delivery Method

Online

Continuing Education Units

0.1

Drug and Alcohol for CMV Drivers

Overview

This course, developed in conjunction with the experts from the Transportation Safety Institute (TSI) of the U.S. Department of Transportation (DOT), provides an overview of the regulations from the Controlled Substances and Alcohol Use and Testing that apply to CMV drivers.

Objectives

After taking this course, you will be able to:

  • State the prohibitions and consequences for the use of alcohol and controlled substances by CMV operators
  • Recognize the types of tests, the testing procedures, and the communication you should expect to receive from your employer.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits (CEUs).

Regulations

FMCSR - 49 CFR 382 and 40

Approximate Length

1 hour

Audience

This course is intended for all CMV drivers.

Delivery Method

Online

Continuing Education Units

0.1

Drug and Alcohol for Management

Overview

This course, developed in conjunction with the experts from the Transportation Safety Institute (TSI) of the U.S. Department of Transportation (DOT), looks at the motor carriers requirements for a Controlled Substances and Alcohol Use Testing Program. The course focuses on the key aspects of a regulation-compliant drug and alcohol testing program.

Objectives

After taking this course, you will be able to:

  • Describe the purpose of the Drug and Alcohol Use and Testing regulations
  • State the prohibitions and consequences for the use of alcohol and controlled substances, including the role of the SAP in positive drug test results
  • Outline the general procedures for testing, the six types of testing required, and the specific requirements for pre-employment testing
  • List the specific requirements for random testing, post-accident testing, reasonable suspicion testing, return-to-duty testing, and follow-up testing
  • Recognize the requirements for record retention and confidentiality, and for providing a drug and alcohol policy to employees.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits.

Regulations

FMCSR - 49 CFR 382 and 40

Approximate Length

2 hours 30 minutes

Audience

This course is intended for all motor carrier personnel associated with their company's Controlled Substances and Alcohol Use Testing Program, including:

  • Safety Compliance personnel
  • Safety Supervisors
  • Human Resource (HR) personnel
  • Operators of commercial motor vehicles
  • Owners.

 

Delivery Method

Online

Continuing Education Units

0.3

Drug and Alcohol Reasonable Suspicion Training for Management

Overview

This course, developed in conjunction with the experts from the Transportation Safety Institute (TSI) of the U.S. Department of Transportation (DOT), provides training in recognizing alcohol misuse and drug use by CMV drivers. Anyone with reasonable suspicion training has the authority to order a reasonable suspicion drug or alcohol test for a driver under certain conditions.

This course covers the regulations related to reasonable suspicion testing, including the procedure for ordering the test. This course also presents the physical, behavioral, speech, and performance indicators that could indicate drug use or alcohol misuse, and therefore trigger a reasonable suspicion test.

Objectives

After taking this course, you will be able to:
  • State the purpose of the reasonable suspicion test, the rules regarding who can order the test, and the steps involved in the testing process
  • Recognize the physical, behavioral, speech, and performance indicators that would trigger an order for a reasonable suspicion test for alcohol misuse
  • Recognize the physical, behavioral, speech, and performance indicators that would trigger an order for a reasonable suspicion test for drug use.

Features

This course has these features and more:
  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits.

Regulations

FMCSR - 49 CFR 382.603

Approximate Length

2 hours

Audience

According to 49 CFR 382.603, "all persons designated to supervise drivers" should receive this training. In practice, this training is for all driver supervisors plus anyone else the motor carrier wants trained.

Delivery Method

Online

Continuing Education Units

0.2

Entry-Level CMV Driver Training

Overview

The Federal Motor Carrier Safety Administration, per 49 CFR Subpart E - Entry-Level Driver Training Requirements, requires all entry-level drivers who drive in interstate commerce and are subject to the commercial driver license (CDL) requirements of 49 CFR Part 383 to complete training addressing the following four areas:

  • Driver qualification requirements
  • Hours of service of drivers
  • Driver wellness
  • Whistleblower protection
This course covers all four topics for the new commercial motor vehicle (CMV) driver.

 

Objectives

After taking this course, you will be able to:

  • Recognize the driver qualification (DQ) regulations purpose and requirements
  • Identify the goals of the Hours of Service (HOS) regulations in 49 CFR 395 and define key terms related to HOS
  • Recognize the maximum driving times allowed for property-carrying CMV drivers and the Out-of-Service criteria for violations of the maximum driving times
  • Identify the exceptions to the maximum driving time rules, including exceptions for special categories of drivers, drivers in special situations, and drivers using a sleeper berth
  • Recognize the required contents of the Record of Duty Status, the Out-of-Service violations of the Record of Duty Status (RODS), and be able to correctly prepare your own RODS
  • Recognize potential health and lifestyle hazards associated with driving CMVs and identify techniques for avoiding them
  • Identify the rights and protections provided by the Whistleblower Protection Act for employees in the transportation industry.

 

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Units.

 

Regulations

 

  • FMCSR - 49 CFR 380.503 - Entry-level Driving Requirements
  • 49 CFR Part 391 - Driver Qualifications
  • 49 CFR Part 395 - Hours of Service
  • OSHA 29 CFR 1978 - Rules for Implementing Section 405 of STAA of 1982

 

Approximate Length

3 hours 30 minutes

Audience

Entry-level drivers are those drivers with less than one year of experience operating a commercial motor vehicle (CMV) with a commercial driver's license (CDL) in interstate commerce.

Delivery Method

Online

Continuing Education Units

0.4

Financial Responsibility for Passenger-Carrying Motor Carriers

Overview

This course, developed in conjunction with the experts from the Transportation Safety Institute (TSI) of the U.S. Department of Transportation (DOT), covers the regulations in Part 387 of the Federal Motor Carrier Safety Regulations (FMCSR): Minimum Levels of Financial Responsibility for Motor Carriers. This course outlines the regulatory requirements for securing and maintaining policies of insurance, surety bonds and endorsements to cover at least the minimum motor carrier financial responsibility for motor carriers of passengers.

Objectives

After taking this course, you will be able to:
  • Describe the minimum level of financial responsibility for motor carriers of passengers.

Features

This course has these features and more:
  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Units.

Regulations

FMCSR - 49 CFR 387

Approximate Length

30 minutes

Audience

This course is intended for all motor carrier personnel who must be knowledgeable about the regulatory standards for motor carrier financial responsibility, including:
  • Motor carrier management team
  • Safety Directors
  • Safety Supervisors
  • Human Resources (HR) personnel
  • Safety Compliance personnel.

Delivery Method

Online

Continuing Education Units

0.1

Financial Responsibility for Property-Carrying Motor Carriers

Overview

This course, developed in conjunction with the experts from the Transportation Safety Institute (TSI) of the U.S. Department of Transportation (DOT), covers the regulations in Part 387 of the Federal Motor Carrier Safety Regulations (FMCSR): Minimum Levels of Financial Responsibility for Motor Carriers. This course outlines the regulatory requirements for securing and maintaining policies of insurance, surety bonds and endorsements to cover at least the minimum motor carrier financial responsibility for motor carriers of property.

Objectives

After taking this course, you will be able to:
  • Describe the minimum level of financial responsibility for motor carriers of property.

Features

This course has these features and more:
  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Units.

Regulations

FMCSR - 49 CFR 387

Approximate Length

30 minutes

Audience

This course is intended for all motor carrier personnel who must be knowledgeable about the regulatory standards for motor carrier financial responsibility, including:
  • Motor carrier management team
  • Safety Directors
  • Safety Supervisors
  • Human Resources (HR) personnel
  • Safety Compliance personnel.

Delivery Method

Online

Continuing Education Units

0.1

FMCSR Motor Carrier Compliance: General Applicability and Recordkeeping

Overview

This course, developed in conjunction with the experts from the Transportation Safety Institute (TSI) of the U.S. Department of Transportation (DOT), outlines the circumstances under which an employer, employee or commercial motor vehicle is subject to the Federal Motor Carrier Safety Regulations.

Objectives

After taking this course, you will be able to:
  • Describe the purpose of the FMCSRs and identify who must comply with these regulations
  • List the documentation requirements, including the Accident Register and additional reports and documents.

Features

This course has these features and more:
  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Units.

Regulations

FMCSR - 49 CFR 390

Approximate Length

1 hour

Audience

This course is intended for all motor carrier personnel who must comply with the Federal Motor Carrier Safety Regulations (FMCSRs), including:
  • Operators of commercial motor vehicles (CMVs)
  • Safety Directors
  • Safety Supervisors
  • Human Resources (HR) personnel
  • Safety Compliance personnel.

Delivery Method

Online

Continuing Education Units

0.1

FMCSR Motor Carrier Compliance: General Cargo Securement

Overview

When cargo is transported on the highway, the cargo must be securely placed on or in the vehicle. Loose or falling cargo causes accidents - sometimes severe accidents. Drivers need to make sure their cargo is secure.

This course provides details on the general cargo securement rules in the Federal Motor Carrier Safety Regulations (FMCSRs), including the driver's responsibilities for cargo securement, the components of a cargo securement system, and ways to safely secure cargo.

The content in this course covers general commodities. Rules for specific commodities are covered in other course titles.

Objectives

After taking this course, you will be able to:

  • Secure cargo on or in a CMV in a manner that complies with the Federal Motor Carrier Safety Regulations, specifically 49 CFR 393 Subpart I - Protection Against Shifting and Falling Cargo and 49 CFR 392.9 - Inspection of Cargo, Cargo Securement Devices, and Systems.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits.

Regulations

FMCSR - 49 CFR 393 Subpart I and FMCSR - 49 CFR 392.9

Approximate Length

45 minutes

Audience

This course is intended for all CMV drivers.

Delivery Method

Online

Continuing Education Units

0.1

Hours of Service for CMV Drivers

Overview

Developed in conjunction with the experts from the Transportation Safety Institute (TSI) of the U.S. Department of Transportation (DOT), this covers the regulations in Part 395 of the Federal Motor Carrier Safety Regulations (FMCSRs): Hours of Service of Drivers. The course addresses key terms, the maximum driving time rules and their exceptions, the circumstances under which a driver may be placed Out-of-Service (OOS), and the requirements for the record of duty status (RODS), also known as the driver's daily log. The course focuses on what the property-carrying commercial motor vehicle (CMV) driver needs to know to comply with the regulations, and provides practice in filling out the Record of Duty Status.

This course covers the regulations in effect as of July 2013.

Objectives

After taking this course, you will be able to:

  • Identify the goals of the Hours of Service (HOS) regulations in 49 CFR 395 and define key terms related to HOS
  • Recognize the maximum driving times allowed for property-carrying CMV drivers and the Out-of-Service criteria for violations of the maximum driving times
  • Identify the exceptions to the maximum driving time rules, including exceptions for special categories of drivers, drivers in special situations, and drivers using a sleeper berth
  • Recognize the required contents of the Record of Duty Status, the Out-of-Service violations of the Record of Duty Status (RODS), and be able to correctly prepare your own RODS.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits (CEUs).

Regulations

FMCSR - 49 CFR 395

Approximate Length

2 hours

Audience

This course is intended for all property-carrying commercial motor vehicle (CMV) drivers who are required to keep a Record of Duty Status.

Delivery Method

Online

Continuing Education Units

0.2

Hours of Service for Management

Overview

Developed in conjunction with the experts from the U.S. Department of Transportation's (DOT) Transportation Safety Institute (TSI), this course covers the regulations in Part 395 of the Federal Motor Carrier Safety Regulations (FMCSRs): Hours of Service of Drivers. The course addresses the applicability of the regulations, key terms, the maximum driving time rules and their exceptions, the circumstances under which a driver can be placed Out-of-Service (OOS), and the record of duty status (RODS) requirements. The course focuses on what the property-carrying motor carrier needs to know to make sure their drivers are in compliance with critical maximum driving and RODS regulations. Motor carrier staff in the role of safety director or supervisor, dispatcher, human resources (HR), and others may have particular need to know the HOS regulations.

This course covers the regulations in effect as of July 1, 2013.

Objectives

After taking this course, you will be able to:

  • Identify the goals of the Hours of Service (HOS) regulations in 49 CFR 395, define the key terms related to HOS, and recognize the importance of critical regulations in this Part
  • Recognize the maximum driving times allowed for property-carrying CMV drivers and the Out-of-Service criteria for violations of the maximum driving times
  • Identify the exceptions to the maximum driving time rules, including exceptions for special categories of drivers, drivers in special situations, and drivers using a sleeper berth
  • Recognize the required contents of the Record of Duty Status, the Out-of-Service violations of the Record of Duty Status, and common mistakes made in preparing the Record of Duty Status.

 

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits.

Regulations

FMCSR - 49 CFR 395

Approximate Length

2 hours

Audience

This course is intended for all property-carrying motor carrier personnel who are required to understand the Hours of Service regulations, including:

  • Safety Directors
  • Safety Supervisors
  • Human Resources (HR) personnel
  • Safety Compliance personnel.

Delivery Method

Online

Continuing Education Units

0.2

Hours of Service for Oilfield Operations

Overview

The Federal Motor Carrier Safety Administration (FMCSA) outlines the Federal rules that motor carriers must follow. One of these rules is 49 CFR 395: Hours of Service for Drivers. The FMCSA recognizes that not all driving operations are the same, and there are exceptions to the Hours of Service rules to address some of the situations faced by a diversified motor carrier industry. This course covers the Hours of Service exceptions for oilfield operations.

Recommended Prerequisite: CSA 2010 - Manager's BASIC 2 - Fatigued Driving (Hours of Service) or CSA 2010 BASIC 2 - Fatigued Driving (Hours of Service)

Objectives

After taking this course, you will be able to:
  • Define the Oilfield Exceptions to the Hours of Service rules and apply the exceptions to real-world situations.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to Regulations
  • Real-world scenarios
  • Objective-based exams.

 

Regulations

49 CFR 395.1(d)(1) and (2) and 395.1(g)(2)

Approximate Length

30 minutes

Audience

This course is intended for personnel at motor carriers engaging in oilfield operations.

Delivery Method

Online

Continuing Education Units

0.1

Hours of Service for Passenger-Carrying CMV Drivers

Overview

This course covers the regulations in Part 395 of the Federal Motor Carrier Safety Regulations (FMCSRs): Hours of Service of Drivers by addressing key terms, the maximum driving time rules and their exceptions, the circumstances under which a driver may be placed Out-of-Service (OOS), and the requirements for the record of duty status (RODS), also known as the driver's daily log. The course focuses on what the passenger-carrying commercial motor vehicle (CMV) driver needs to know to comply with the regulations, and provides practice in filling out the Record of Duty Status.

This course covers the regulations in effect as of July 2013.

Objectives

After taking this course, you will be able to:

  • Identify the goals of the Hours of Service (HOS) regulations in 49 CFR 395 and define key terms related to HOS
  • Recognize the maximum driving times allowed for passenger-carrying CMV drivers and the Out-of-Service criteria for violations of the maximum driving times
  • Identify the exceptions to the maximum driving time rules, including exceptions for special categories of drivers, drivers in special situations, and drivers using a sleeper berth
  • Recognize the required contents of the Record of Duty Status (RODS), the Out-of-Service violations of the RODS, and be able to correctly prepare your own RODS.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits (CEUs).

Regulations

FMCSR - 49 CFR 395

Approximate Length

2 hours

Audience

This course is intended for all passenger-carrying commercial motor vehicle (CMV) drivers who are required to keep a Record of Duty Status.

Delivery Method

Online

Continuing Education Units

0.2

Indiana Metal Coil Certification

Overview

When cargo is transported on the highway, the cargo must be securely placed on or in the vehicle. Loose or falling cargo causes accidents - sometimes severe accidents. As a driver, you need to make sure your cargo is secure.

This course provides details on the Federal Motor Carrier Safety Regulations (FMCSRs) covering the securement of metal coils, including the driver's responsibilities for cargo securement and the ways to safely secure this type of cargo.

Objectives

After taking this course, you will be able to:

  • Secure cargo on or in a CMV in a manner that complies with the Federal Motor Carrier Safety Regulations, specifically 49 CFR 393 Subpart I – Protection Against Shifting and Falling Cargo and 49 CFR 392.9 – Inspection of Cargo, Cargo Securement Devices, and Systems.
  • Secure metal coils to a CMV in a manner that complies with the special rules for that commodity included in the Federal Motor Carrier Safety Regulations (FMCSRs), specifically 49 CFR 393.120.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Units.

Regulations


FMCSR - 49 CFR 393 Subpart I with a particular focus on 393.120
FMCSR - 49 CFR 392.9

Approximate Length

45 minutes

Audience

This course is intended for CMV drivers who transport metal coils.

Delivery Method

Online

Continuing Education Units

0.1

Operating CMVs: What Drivers Need to Know

Overview

This course, developed in conjunction with the Transportation Safety Institute (TSI) of the U.S. Department of Transportation (DOT), covers the regulations in Part 392 of the Federal Motor Carrier Safety Regulations (FMCSR): Driving Commercial Motor Vehicles (CMVs). This course outlines the minimum regulatory requirements for driving commercial motor vehicles. It focuses on information the driver needs to know to comply with the regulations.

Objectives

This course teaches concepts and skills necessary to:
  • List the driver, trip, and general safety prohibitions for driving commercial motor vehicles (CMVs)
  • Recognize the inspections, precautions, and general safety practices for driving CMVs.

Features

This course has these features and more:
  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Units.

Regulations

FMCSR - 49 CFR 392

Approximate Length

1 hour

Audience

This course is intended for all CMV drivers.

Delivery Method

Online

Continuing Education Units

0.1

Operating CMVs: What Management Needs to Know

Overview

This course, developed in conjunction with the Transportation Safety Institute (TSI) of the U.S. Department of Transportation (DOT), covers the regulations in Part 392 of the Federal Motor Carrier Safety Regulations (FMCSR): Driving Commercial Motor Vehicles (CMVs). This course outlines the minimum regulatory requirements for driving commercial motor vehicles.

Objectives

After taking this course, you will be able to:
  • Outline the applicability and prohibitions for driving commercial motor vehicles (CMVs)
  • Explain the inspections, precautions, and general safety practices for driving CMVs.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to Regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Units.

 

Regulations

FMCSR - 49 CFR 392

Approximate Length

1 hour

Audience

This course is intended for all motor carrier personnel who must be knowledgeable about the regulatory standards for driving a commercial motor vehicle (CMV), including:

  • Operators of commercial motor vehicles (CMVs)
  • Safety Directors
  • Safety Supervisors
  • Human Resources (HR) personnel
  • Safety Compliance personnel.

Delivery Method

Online

Continuing Education Units

0.1

Safe Driving Practices for CMV Drivers

Overview

This course, developed in conjunction with the experts from the Transportation Safety Institute (TSI) of the U.S. Department of Transportation (DOT), covers the Defensive Driving portion of the Federal Motor Carrier Safety Administration (FMCSA) Accident Countermeasures Manual.

Employing defensive driving techniques makes every driver on the roadway safer. This course provides driving tips and maintenance checks to help CMV drivers use defensive driving techniques while operating CMVs.

Objectives

After taking this course, you will be able to:

  • Avoid accidents that commonly occur during start-up/back-up procedures, when parking, while negotiating intersections and establishing right-of-way, and while negotiating curves and downgrades and making turns
  • Avoid accidents that commonly occur while using and changing lanes, passing other vehicles on the road, interacting with pedestrians and passengers, and while driving in adverse conditions, and to recognize the equipment available and procedures to follow in an emergency situation.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits (CEUs).

Regulations

FMCSR - 49 CFR 383, 392, 393, and 3

Approximate Length

1 hour

Audience

This course is intended for all CMV drivers.

Delivery Method

Online

Continuing Education Units

0.1

Tanker Truck Inspections for Drivers

Overview

Even a safe driver cannot avoid accidents caused by mechanical failure; the best defense against this type of accident is prevention through performing the appropriate inspections.

This course focuses on the role of the CMV driver in keeping his or her CMV in safe working order by inspecting the vehicle at the start and end of every day. By properly inspecting the vehicle you drive, you will help keep other drivers and yourself safe on the highway. In this course, you will learn about the types of inspections that drivers need to complete, including what to do if you uncover defects or problems during an inspection. In addition, you will see the specific items to inspect on MC 307/DOT 407 and MC 312/DOT 412 tanks.

Objectives

After taking this course, you will be able to:

  • Identify the inspections a driver must perform on his or her CMV
  • Recognize the components of a tanker truck that must be part of a driver’s daily inspections, including the components particular to MC 307/DOT 407 and MC 312/DOT 412 tanks.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Units.

 

Regulations

FMCSR - 49 CFR 392, 393, and 396

Approximate Length

1 hour

Audience

This course is intended for CMV drivers hauling MC 307/DOT 407 or MC 312/DOT 412 tanks.

Delivery Method

Online

Continuing Education Units

0.1

Texas Regulations and FMCSR Exceptions for Intrastate Commerce

Overview

The Texas Department of Public Safety (DPS) adopted the Federal Motor Carrier Safety Regulations (FMCSRs) for commercial motor vehicle transportation within the State, with a few exceptions. This course covers the specific differences between the federal rules governing interstate commerce and the state rules for intrastate commerce in Texas. 

Note: You should be familiar with the FMCSRs before taking this course.

Objectives

After taking this course, you will be able to:
  • Recognize the Texas DPS amendments to the FMCSRs for motor carriers who engage in intrastate commerce.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • TMTA Completion Certificate.

 

Regulations

Texas Exceptions to FMCSRs 390, 391, 393, 395, 396, and 397

Approximate Length

30 minutes

Audience

This course is intended for management personnel at motor carriers engaging in intrastate commerce in the State of Texas.

Delivery Method

Online

Continuing Education Units

0.1

Vehicle Inspection and Maintenance for CMV Drivers

Overview

Even a safe driver cannot avoid accidents caused by mechanical failure; the best defense against this type of accident is prevention through performing the appropriate inspections. This course, developed in conjunction with the experts from the Transportation Safety Institute (TSI) of the U.S. Department of Transportation (DOT), focuses on the role of the CMV driver in keeping his or her CMV in safe working order by inspecting the vehicle at the start and end of every day. By properly inspecting the vehicle you drive, you will help keep other drivers and yourself safe on the highway. In this course, you will learn about the types of inspections that drivers need to complete, including what to do if defects or problems are uncovered during an inspection. In addition, you will see detailed requirements for some of the equipment covered in the driver vehicle inspections.

Objectives

After taking this course, you will be able to:

  • Fulfill the driver's inspection requirements, and follow the appropriate procedures in the case of a vehicle deficiency
  • Identify the safe operation requirements for equipment that must be checked during the driver inspection.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits (CEUs).

Regulations

FMCSR - 49 CFR 392, 393, and 396

Approximate Length

1 hour

Audience

This course is intended for all CMV drivers.

Delivery Method

Online

Continuing Education Units

0.1

Vehicle Inspection, Repair, and Maintenance Regulations

Overview

This course, developed in conjunction with the experts from the Transportation Safety Institute (TSI) of the U.S. Department of Transportation (DOT), outlines the minimum regulatory requirements for inspection, repair, and maintenance with which all interstate motor carriers, employees, and drivers must comply.

Objectives

After taking this course, you will be able to:

  • Describe the applicability and requirements of inspection, repair, and maintenance for motor carriers
  • Identify the commercial motor vehicle (CMV) inspection requirements and reports
  • Recognize the periodic inspection requirements, and identify the standards for qualified inspectors.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits.

Regulations

FMCSR - 49 CFR 396

Approximate Length

1 hour

Audience

This course is intended for all motor carrier employees directly concerned with the inspection, repair, and maintenance of motor vehicles, including:

  • Operators of commercial motor vehicles (CMVs)
  • Safety Directors
  • Safety Supervisors
  • Human Resources (HR) personnel
  • Safety Compliance personnel
  • Maintenance personnel.

Delivery Method

Online

Continuing Education Units

0.1

Vehicle Parts and Accessories Safety Regulations

Overview

This course, developed in conjunction with the experts from the Transportation Safety Institute (TSI) of the U.S. Department of Transportation (DOT), outlines the minimum parts and accessories on a commercial motor vehicle required for safe operation.

Objectives

After taking this course, you will be able to:

  • Recognize the minimum applicability requirements, and the minimum safety requirements for lamps, reflective sheeting, turn signals, wiring, and batteries on commercial motor vehicles (CMVs)
  • Identify the minimum safety requirements for windshields, mirrors, horns, speedometers, emergency equipment, fuel systems, and exhaust systems on CMVs
  • Recognize the minimum safety requirements for suspension systems, steering systems, frames, tires, and wheels on CMVs
  • Identify the minimum safety requirements for brakes and coupling devices on CMVs
  • Recognize the minimum safety requirements for cargo securement on CMVs.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Credits.

Regulations

FMCSR - 49 CFR 393

Approximate Length

2 hours 30 minutes

Audience

This course is intended for all motor carrier personnel associated with their company's mechanical and safety programs, including:

  • Operators of commercial motor vehicles (CMVs)
  • Safety Directors
  • Safety Supervisors
  • Human Resources (HR) personnel
  • Safety Compliance personnel
  • Maintenance personnel.

Delivery Method

Online

Continuing Education Units

0.3

Whistleblower Protection (Transportation)

Overview

Under the OSH Act, employees have the right to a workplace free of recognized hazards. When an employee appeals to OSHA to remedy workplace hazards, the employee may be labeled a “whistleblower.” This course teaches employees about the OSHA protection for whistleblowers in the transportation industry, specifically the commercial motor carrier industry. Learn when and for whom whistleblower protection applies, including whistleblower protection from discrimination and retaliation, and the OSHA requirements for filing a complaint.

Objectives

After taking this course, you will be able to:
  • Identify the rights and protections provided by the Whistleblower Protection Act for employees in the transportation industry.

Features

This course has these features and more:

  • Multimedia
  • Narration
  • Interactivity
  • Easy navigation
  • Supplementary material
  • Links to regulations
  • Real-world scenarios
  • Objective-based exams
  • Continuing Education Units.

 

Regulations

FMCSR – 49 CFR 380.503 – Entry Level Driving Requirements

OSHA - 29 CFR 1978 - Rules for Implementing Section 405 of the STAA of 1982

Approximate Length

30 minutes

Audience

This course is intended for all employees in the commercial motor carrier industry.

Delivery Method

Online

Continuing Education Units

0.1

Customer Reviews

Write a reviewNo reviews for this product.
Call us toll-free: 888-337-2121
arrows